TelePresence and Video Infrastructure

Hi,In my network , I have an MCU , TMS , and Endpoint ( codecs + jabber video).I Can schedule a conference directly from MCU , and all codecs can connect to the conference by dialing the MCU ( H323 ID, SIP URI) and by using the ( conference ID and a ...

Hi AllWe have a client that has an SX20 with ISDN link and Multisite loaded.  There are 4 x BRI ISDN lines active and installed.   Does anyone know how many concurrent telephone calls the unit will support.  I know the theory says its 64k per call wh...

Trying to setup two EX90 to be able to make calls between each other. I am aware that native registration is not supported until 8.6.Any information would be greatly appreciated. Thanks in advance,Yefimysapoz@stewart.com

We see a strange issue with C20 Presentation.We are not able to share the presentation from our C20. The Presentation is seen locally on the Second screen, but not transmited to the Far end.Xstatus Diagnostics / Xstatus Mediachannels show a content c...

Does anyone know what type of phone I should define a Tandberg EX90 in Call Manager 7.1?  I am inclined to define it as a third party SIP (advanced), but telepresence and H.323  look like they might apply as well.

Hi , I m using Cisco jabber with ( TMS and VCS), and I have some questions :1- How we can give the user the possibility to change the password ?2- how we can disable the acces to the "setting menu on the cisco Jabber?3- How we can configure a min/max...

Can someone please tell me what setting in Advanced Configuration Shows/Hides the Status bar that shows at the top of the Idle Screen on the MX and EX Series Endpoints? This is the Bar that has the System Name along with Clock and Date. Thanks! Jason

We have a very minute problem with our phone system. Not entirely sure if it's how the software works or it's because it wasn't programmed correctly. But when one of our phones tries to transfer a phone number to another number here it displays a dif...

Is it possible to control the precisionHD TTC8-01 camera without the rest of the tandberg equipment?  I had a complete set of gear and everything got zapped by a power surge except for the camera.  I would like to use it with a seperate standalone Cr...