TelePresence and Video Infrastructure

When I join a Polycom 3 screen endpoint to a TelePresence Server 8710, do I need to use grouped endpoints?What is the behavior when you have 1 CTS 1000 and 1 Polycom 3 screens in a TelePresence Server 8710?The CTS 1000 sees only the active speaker on...

Hi,Need information ; which telepresnece exchange support B2B call between Ex90 and cts 3010?

Hi all,I had been working for long time with Polycom systems. I just started to work with Cisco. Now we are competing with Polycom in a customer. The customer has two CTS 3010s and some standard videoconferencing systems. And they want to buy new HD ...

AllWe are deploying an increasing number of VCS Control/Expressway for firewall traversal. While we are confident of the security preventing unauthorised calls, it doesn't stop every idiot out there trying to commit toll fraud. The problem is these r...

Hi all,Does anyone know the new IP Phone set "CP-9971" support video streaming via the external programming or not. I goes through the programming guide and it seems it doesn't mention how to instruct the 9900 IP Phone to recevie the multi-cast or un...

Cisco TelePresence Conductor XC2.0 is released and now available from http://software.cisco.com/download/release.html?mdfid=284262814&flowid=30841&softwareid=280886992&release=XC2.0&relind=AVAILABLE&rellifecycle=&reltype=latest.The standard software ...

I find that if the endpoints or MCUs (h323) register on VCS, it is not able to call the ip address of them. Is this a normal situation or there are some settings I have to change to make it work?

Hi all,Please tell me why the call from the ex60(with public IP address) fails to "free" Jabber (jabber.com).I would be grateful for help. ThanksIldar

Is it possible for lync client to join cisco video conference endpoint without using cisco MCU or can lync client  after the integration with cisco VCS join cisco multiconferencing without the cisco mcu?

Hi all.I have the following architecture:Internet --> VCS-E -- (Traversal Zone) --> VCS-C plus a TMS server for provisioning.I would like to implement Jabber from Internet, registering on the VCS-C. I know that I have to pass the registration request...

Hi all,I reset password of MCU4501 to default without backing up configuration. So now, MCU need to be activated for proper operation (there's a message "Product not activated. Activation key required")How can I get the activation key?Please help me ...

Hello, I'm kinda keen on the SX20 for its low price point compared with what it can do. It seems to compare pretty favourably with the C40 for general conference room work (1 HD camera, 1 screen, 1 mike) We are currently managing our other video syst...

Hi,We have a problem with the communication between VCS and CUCM.On the VCS-C the SIP trunk to the CUCM seems to be ok.But i could not place a videocall from VCS to CUCM.In the sdi trace of the CUCM a x509 certifcate error appears.    I uploaded the ...

Hi all,a customer runs a Edge 95 directly on a S-DSL Line - without any FW in front of it.The MXP also has some BRI connections.It seems that the system has been hacked and caused to dial out telephone numbers in south american area.What he can do ma...

Hi all,We have implemented SX20 in our customer site and customer has the old tandberg 880 model (software released 2003).When SX20 call to tandberg 880 I got busy but when tandberg 880 call back to SX20 I got only audio.Anyone please suggest what pa...