We have a customer that has a SX20 that reboots as soon as they connect to an other endpoint.I know there are some kind of clock that needs to be synced in order for a connection to funktion properly, but I've forgotten how to force them to sync.Does...
I have my analog phones under the control of CME but when i try to press the **5 to pickup a call I get a fast busy the first time i press the * prefix. Any ideas why this is ? Parts for config belowstcapp ccm-group 1stcapp security trustpoint SJS2...
Hi All,I am experiencing the SIP UDP timeout issue described here:https://supportforums.cisco.com/message/3799280#3799280I understand that this is part of the RFC for SIP and that the VCS will always try SIP UDP first, so I have experimented with dis...
Hi I have been looking at the admin guide for the new ISDN link box for telepresence and I think I have the gist of how the system should be configured.I have some questions.firstly I would like to confirm that the dial string as detailed in the admi...
The T1/T3 Administrator Guide http://www.cisco.com/en/US/docs/telepresence/endpoint/t3/guides/telepresence_t1_t3_admin_guide_tcu42.pdfPage 30 "Appendix 1—Factory reset of TCU"Step 4: Format the USB stick (FAT1/T32).I believe it is a typo. Since FAT1/...
Hi!What is the reason why the VCS running findme also has to run the presence server.With the combination that there shall be only one presence server for a specific domainand the need that a domain has to be added on the presence server, authenticat...
Dear Team,We have an MXP edge 95 with ISDN BRI Line connection, Here when we connect the call after 5-10 minutes the call gets disconnected.Currupted Data Recieved message comes.and also on diagonostic page during the call, Frame Loss Total & Capabli...
Need advise on how to convert a SIP call to H.323 call.I have a SIP incoming call to VCS-A and I would like the VCS-A to send the call to VCS-B as a H.323. Can this be done and how?Thanks,Khoa
Hi All, I have a a problem with the LDAP connection of the VCS control.As far as I have configured everything in the lab with the port of 389. That works fine.In another case at my customer, I need to use the port 3268. The LDAP connection is g...
have the software ruinning in basic mode on my windows 7 pc also have a cisco camera on the network,I can get bthe monitor to know it is there, but it doen not connect.theyb are on the same subnet and there is just switch ports between them.what am I...
ON the EX90s, when I select the Cisco VCS as teh Infrastructure option, it prompts me for UsernamePasswordDomain and External Manager.What username and password is this trying to authenticate against? Where is this configured? IS this done in TMS? I ...
With VCS cluster implementation, there are four options for endpoints to connect to a cluster: SIP Outbound (preferred), DNS SRV (2nd choice), DNS Round-robin, and Static IP (lease preferred). I’m using option 1. With option 1, an EP register to ...
