TelePresence and Video Infrastructure

Good Morning,I have a client with Cisco TMS 13.1.1 running on Windows 2008 R2.  Their IS department wishes to install SP1 on the server.  Has anyone had this with a client and did any TMS problems occur after the Service Pack installation?Thanks, Pau...

Hello all,I need a support for SIP URI Dialing.I have CUCM 8.6.2a in place and 9971 and EX90's  are registered with this. My issue is, From 9971 phones we are able to place PSTN calls, but from EX not able to make any PSTN calls.The PSTN is configure...

When scheduling a meeting the MCU gets the meeting from TMS but does not receive the PIN put in the Password/PIN field on TMS.I am looking for some troubleshooting help - what controls this relationship and how should it behaveThank youSent from Cisc...

Hi everyone,I know - the termed product is not one of the newest, but I need the Online-Help files for this MCU, which is running latest sw.I only found CD-140506_CS.zip file (under Software on Chassis : Cisco Unified Videoconferencing 3545 System   ...

We currently have 300 movi users and growing and are looking to intergrate the Movi login with AD so users who are provisioned in TMS can sign into movi with their AD credsWhat is needed to accomplish this and how and where in TMS do changes needed ...

Has anyone came across this error ?What causes this error in vcs ?

Hello,Is it possible to download the Jabber client for ipad directly to the iPad itself? I've downloaded many other apps but this is my first attempt at a Cisco app for the iPad. I was expecting it to just work but Safari says it cannot download the ...

Hi all,      I am having serious problems when trying to set provisioning between my VCS and TMS, I have followed all the steps, DNS,NTP,SIP config and etc..Option Keys are installed,  But everytime that I switch on the TMS Agent Data Replication ON ...

Hi Cisco Support CommunityDoes any one know what the following error messages mean from a Tandberg classic border controller?Oct 5 14:01:06 vale-bc syslogd 1.5.0: restart. Oct 5 14:01:06 vale-bc root: Event="System   Start" Level=1 UTCTime=2012/10/05...

Hi all,I upgraded a three older (circa 2010) c20s from TC3 to TC5 last weekend. This went smooth in all but one location. In our MA office the unit is reporting: "Please wait while camera software is upgrading". Our staffer there reports:Our video co...

Is it possible to have two MCU auto attendants linked together, as follows:MCU #1 Auto Attendant:Go to MCU #2 - (takes you to MCU #2) <MCU #1 Conferences>MCU #2 Auto Attendant:Go to MCU #1 - (takes you to MCU #1)<MCU #2 Conferences>This would be if y...

Anyone run into an issue where as soon as I enable MGCP, the ports that use "service mgcpapp" will have a really bad hiss on them.  Other ports that aren't set to use mgcpapp are fine.  There is no actual connection to an MGCP gateway so the hiss isn...

Hello!From design guides and presentations that describe pros/cons to register video devices on different call agents (CUCM or VCS) I can conclude that in different cases like when H.323 endpoint registration is necessary - we need one call agent, in...