TelePresence and Video Infrastructure

Calling into conference in progress

Is there a way I can have TMS schedule selected endpoints to call into an already scheduled conference in TMS? We use an MCU to host our conferences.Conference A: 2:00-4:00pEndpoint 1Endpoint 2Endpoint 3Conference B: 3:00-4:00pEndpoint 4Endpoint 5...

ex90 sharing local contacts book

Is there a way to import/export the local contacts from one unit to the other. Also looking to import and export from E90, E20 and C40 models.Thank you.

Migrating MGC to a ISDN GW

I have recently migrated an MGC 50 v9.3 PRI to a Cisco ISDN GW.The issue I am running into is that the ISDN GW will not dial outbound over the PRI, but when I switch the PRI back to the MGC, outbound dialing works fine.There are no prefixes establish...

EX60/Touch Screen security config ?'s

In the process of replacing our old 1000MXP endpoints with new EX60 units. Trying to lock things down real tight for security purposes. Set a password to prevent user access to the admin settings through the touch panel. Is it possible to drill down ...

dropped udp video problem

Basically I have 6 CODECS on a LAN with UDP Unicast video from each box, I have multiple clients viewing the video so around 700 Mbps throughput.I have a Cisco SG30-10 Small business switch with a dedicated port for each CODEC, all traffic leaves the...

TMS Alerts for Active Conferences

I know you can have audiable alerts for open active conferences in CCC within TMS, but can you have email alerts for any conference wheither it is open or not? Alerts such as packet loss, disconnect, connect, connection error, etc.Thanks, Patrick

Monitoring resources on an MSE 8510 Blade

Hi,Does anyone know of any software availiable to monitor MCU usage & warn the administrator should ports become full? At the minute we have to manually logon to the system and check who is using what and manually tally the port usage up, not to ment...

Resolved! MCU Content doesn't display on iPad

I've found that when using the Jabber for iPad app, I can connect to an endpoint, point-to-point (C-Series, Movi), and I'm able to recieve the content channel just fine. Though when I'm connected through our MSE8510 MCU, I don't get the content chan...

TMS billing code question

Hi,I know it is possible to import .txt files in the format into TMS. 101, Description for billing code 1.102, Description for billing code 2.103, Description for billing code 3Unfortunately, each time I try to upload the .txt file it fails. As an al...

CTS 500 endpoint calls and CUCM 1.8 UCS

Greetings Any ideas please Core Infrastructure – All equipment installed on a single VLAN, the units are physical devices running VM as per below I have added endpoints to CUCM publisher and went through the configurations as per user guide, also che...

C 90

i have C 90 . i plug ON the but system not show the MENU and Camera Show self view when i move the Camera . Yasir Vistro

Resolved! Question on Cluster name and DNS SRV records of VCS Cluster

We have some inquries on the Appendix 9 – Cluster name and DNS SRV records of the document- Cisco_VCS_Cluster_Creation_and_Maintenance_Deployment_Guide_X7-1.In our current network, we have installed TMS on the Window server 2003 R2, however, we faced...

Mcu 4505 call preconfigured participants

Hello,I created a permanent conference at MCU and added to preconfigured participant which is couple defined endoints.I setup Invite pre-configured participants field as "When at least one other participant is present".When I call this conference num...

Profile 42 C40 is unable join to CTMS

Hi, I've tried to join to CTMS 1.8 static meeting from Profile 42 C40 (with ext 30003), but it doesn't get any video. From CTMS log, there is ALARM_CALL_FAILURE : Call dropped. Meeting: 9064797157. Call number 30003 ended with message: NO_RESUM...

bw req Ex60 & C20

What iz the min bw req for Ex60 and C20. Is there any customer readiness doc available. How should be the room lighting. What is the preferred media like fiber or wimax for VC.

TelePresence and Video Infrastructure

Forum Posts

Calling into conference in progress

ex90 sharing local contacts book

Migrating MGC to a ISDN GW

EX60/Touch Screen security config ?'s

dropped udp video problem

TMS Alerts for Active Conferences

Monitoring resources on an MSE 8510 Blade

Resolved! MCU Content doesn't display on iPad

TMS billing code question

CTS 500 endpoint calls and CUCM 1.8 UCS

C 90

Resolved! Question on Cluster name and DNS SRV records of VCS Cluster

Mcu 4505 call preconfigured participants

Profile 42 C40 is unable join to CTMS

bw req Ex60 & C20

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Cisco Room Kit Mini - Local Device Controls: Page not found / inaccess

Example CSV file for migrating on prem VCS to cloud onboarding

Cisco Codec Pro Question

Recording p2p calls on Codec pro

CS-Codec-Plus V01 # TCC7-25 compatibility with Polycom RealConnect

Expressway zone not responding- inbound TLS negotiation Error

UNLICENSED STATUS ON CMS WITH CMM

Cisco Webex MS Teams video calling (VIMT)

Quad Camera Power Supply part number?

Audio distortion from a cisco webex codec pro