TelePresence and Video Infrastructure

Hi all;     We integrated CTS man and TP server for schedule meeting . During a meeting , last 10 min. CTS500 shows a timer icon bottom of the screen . But we join in the same meeting with CTS3010 , it doesn’t show the timer . what is the reason ?  R...

I was running the TCS Wizard to move the default storage location from the E: drive to a network share.  All seemed to go well, no problem with permissions or accessing the network share until the end.  I got an error message regarding the media file...

Hello:My understanding is the TMS has an API that we can use to pull reportinginformation. I looked at cisco.com and the only TMS API I can finddocumentation on is the booking API. Is it the same interface? Can youplease point me to overview document...

Hi to allI will try to give you an idea what we have setup and what is the senario Central infrastracture : CTM,CTMS,CUCM,CUVC,2911 with 10 MB line for the external video callsEndpoints: 5 CTSWe want to establish a video conference with external vide...

Hi.Is it possible to use the 2.nd ethernet port on a c60 codec for sending x.commands to the codec.My problem is that the controlsystem (AMX) is on a separate, internal network.Regards.Henning Telving

Egypt does not observe daylight savings time as of April of 2011, however as of this April it still appears to be observed on our TMS 13.0 server.  All our Egypt endpoints have been adjusted to not observe DST.  And it has not impacted the connection...

Hi,I'm using C40 and C90 register to CUCM as a native client. When I call between these endpoints call never connected with 1080p resolution(it connected with 720p)But when I change the endpoints register to VCS, the call was connected with 1080p.I'm...

Hi,TMS cannot seem to scan the user to check the user group memberships, therefore I cannot apply any additional permisions outside the TMS default group.I do get the following error:13:48:03,186 [71] WARN  Tandberg.TMS.Framework.Service.UserGroup.Us...

I´d like to know if is possible to register E20 phones at CUCM server as a 2nd line.The 1st. line is registered at my VCS server and I have also a TMS to provisioning the Tandberg equipments.What I need to do for this integration ? There are some doc...