TelePresence and Video Infrastructure

Hi All, We have a VCS Control and VCS Expressway and endpoints. VCS control and endpoints are in the same subnet. We have recently purchased a dedicated internet link for video traffic alone. I have configured the policy based routing in the LAN so t...

Hello, What do you think about using a neighbor zone on VCS for MCU in SIP against classic registration. It's the only way i found to palliate SiP generic préfix registration leack.Tank youRegardsSent from Cisco Technical Support iPad App

Hi All,Using the cisco router (2900 series) as an SIP to E&M gateway. On one side we have a SIP device and on the other side of the gateway we have an E&M device.When the E&M device terminates a call the gateway should issue a SIP BYE message to the ...

hi,when i connect analog line direct to analog phone the voice volume is fine but when i connect to 2911 router (fxo port) the volume is low. i have cucmbe8.6 as call agent and 2911 as voice gateway.. following is the config for voice portsvoice-port...

  Hi,After a long search, I don't find information on the process of update release key for the endpoints in the TMS.In TMS, some endpoints don't have license key for the update although they are under maintenance while others pick them up correctly....

Hi,I have a question about the dial format to call from a Cisco/Tandberg C20 to a Polycom H323 device.I tryied to call using the following formats:Public_IP##extentionextention##Public_IPPublic_IP!extentionPublic_IP@extentionThe didn't work at any ti...

Hello all,Need to know for registering movi client with vcs required special license in vcs?We have a vcs X6.1 and tms 13-ver., Iam trying to register movi client, in the advances setings had provided the vcs ip.When trying to login with user id(wind...

                   Hi Guys,what is the bandwith requirement for TX9000, i need to know some practical experience knowledge bec on cisco website its 10MB and one of the cisco customer are saying 14MB

Hi I have the follow SituationTMS 13.x connect to a external SQL Sever 2005Is it possible to upgrade a TMS SQL Database (tmsng) from 2005 to 2008?Because we are using a external Database SQl 2005, now the SQL team would Upgrade the SQL Server to 2008...