TelePresence and Video Infrastructure

ACL for VOIP SIP,H323,SCCP

Hi,i have a problem in understanding the acl rule for sip h323 or SCCP.WE will use this for connect ip Communicator to CMEThe CME has the IP : 192.168.10.254The ASA Inside Interface IP : 192.168.10.1The ASA Outside Interface IP: x.x.x.x (static)I co...

Cisco 2921 license help.

Hello guys. I have bought a second hand 2921 router for my personal lab. The router came with only ipbase license. That means I cannot use cme and also cannot configure the router with any gateway functionality. My question is. If I want to enable ...

Cisco Mobile 8.1 SIP no Cancel/Bye

Good afternoon,I have an issue with SIP disconnect issue.Cisco Mobile 8.1 not sending Bye/Cancel message to the SIP server (CME 8.6) to the remote server, call is still in progress on the remote server and no hangup.From other side, as soon as I push...

Telepresence Server 8710 timezone

Checkting the NTP settings on our 8710 cluster and noticed that we have the option for a UTC offset but we can't set a timezone. This causes issues with automatic switchover for Daylight Savings time. Is there a workaround for this and will this be...

Problem with multiway on C90

Hi all,We have some problems with our C90 using Multiway.We have some C20 and two C90, 2 VCS Control and one MCU 8510.When I make a call between the C90 and one C20 all works fine, but when I try to add a new participant from the C90, the device free...

Cisco TMS install

Hi,I'm trying to install TMS on VM. it asks me for to assign IP address when I try to install TMS. should I give it the same IP address as VM's IP address?

call transfers not working after gateway upgrades

we recently upgraded our voice gateways (1861s) from 12.4 to 15.1 --- (C1861-ADVIPSERVICESK9-M), Version 15.1(4)M1 After the upgrade, we cannot transfer calls from phones at the upgraded locations to phones at non-upgraded locations, but visa versa ...

Jitter settings/configuration on 2811 router

Hi All,Are there some basic settings to change the jitter buffer on a cisco 2811 voice router?, currently the iOS running on it is 12.4 (3g)Sent from Cisco Technical Support iPad App

CTS 1300 compatibility to C-20 based endpoint system

Can you tell me if a CTS 1300 system can point to point conference a C-20 endpoint or register to a Codian MCU(4501) or does it require CUCM, VCS server etc to allow this?Thanks

Cisco TelePresence Commercial Express

Do we need a separate Cisco Unified Communications Manager for communication between TelePresence endpoints when using Cisco TelePresence Commercial Express.

Resolved! Lync hosted meeting

Hello. Is it possible for a VCS registered endpoint to join a Lync hosted meeting with multiple video participants? I have used the Lync deployment guide to successfuly integrate my Lync and VCS networks, but I can't get this feature to work. Just...

Does anyone have the Database Schema for TMS 13.0

We are interested in getting our hands on a database map or schema for the current version on TMS.We want to monitor TMS and MOVI license usage. We have a product (Science Logic EM7) that can read the SQL DB, but we just need to know were to look. Ou...

Resolved! New branch in diffrent country .. what the best practice ??

hi all,we have call manager v8.0.2 .... also we have two branches in the same country and we have installed 2901 srst voice gateway over there .... now we are opening new branch in neighbor country and we looking forward to extend our voice solution ...

Tandberg Video Switch With Tandberg Edge 95

Dear All,Can i use the video switch of tandberg to use two cameras with tandberg edge 95 unit? If i can do this, what version of software for both devices?ThanksOmar Mahmoud

Resolved! Movi Installation

What file do I send to my support group in order for them to "push" the Movi application file to several PCs at one time?

TelePresence and Video Infrastructure

Forum Posts

ACL for VOIP SIP,H323,SCCP

Cisco 2921 license help.

Cisco Mobile 8.1 SIP no Cancel/Bye

Telepresence Server 8710 timezone

Problem with multiway on C90

Cisco TMS install

call transfers not working after gateway upgrades

Jitter settings/configuration on 2811 router

CTS 1300 compatibility to C-20 based endpoint system

Cisco TelePresence Commercial Express

Resolved! Lync hosted meeting

Does anyone have the Database Schema for TMS 13.0

Resolved! New branch in diffrent country .. what the best practice ??

Tandberg Video Switch With Tandberg Edge 95

Resolved! Movi Installation

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Cisco Expressways SSO for admins with MFA

FN - 72542 related to BroadWorks

MX800 Screen Issues

Need help about CTS-SX80-IP60 function.

Clustered CallBridges with Connection Attempted status

CMS Recorder / Certificates

CMS Edge instead of Cisco Expressway for External WebRTC

CMS 3.6 Edge server

Manage multiple CMS clusters with 1 CMM

Room Kit - Dual Display Presentation Mode