C20 and SX20 Camera Cable

[Leonardo Santana]

Hello,

Can i use the same cable from C20 Camera on the SX20 Camera?

Regards

Leonardo Santana           

[Rafal Szeremeta · Accepted solution]

Hello Leonardo

SX 20 and C series use different connections for the cameras, so that is not possible using supplied cable.

Please check this link:

http://www.cisco.com/en/US/docs/telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.pdf

Thank you

Rafal

[Leonardo Santana]

Ok Thanks

And the hdmi cable that connects on tv is the same for C20 and SX20 correct?

Regards

Leonardo Santana

[Adam Wamsley · Accepted solution]

Hey Leonardo,

Yes the hdmi cable for the TV/Monitors are the same for each codec. The SX20 supports the Visca protocol which is why the camera cable is different. I however have connected a regular HDMI cable between the camera and codec without any issues as far as I can see, but always keep in mind to follow the guides and use the recommended cables.

Adam

[Leonardo Santana]

Thanks Adam    

I ll follow the Cisco recomendations.

Regards

Leonardo Santana