cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4826
Views
55
Helpful
16
Replies

ce9 Administrative settings on the touch 10/remote

Bobby McGonigle
Level 1
Level 1

Hello All,

I've been messing around in the ce9 environment to see if it's set to send out to our users across campus and I notice something odd in the settings. It seems aa though there is no more administrative lockout when accessing the CODEC in the touch panel or while using the remote and this will give our users the potential to factory reset the system their using. I can't see any way in the web server to enable this feature that was always present in ce8 and others.

Does anyone here or in cisco know if this will be addressed in ce9? Or is there something I'm overlooking in the configuration that will allow me to block users from accessing this information?

Below is a reference image taken from an SX10 CODEC running ce9.1.2. But this issue is also present on the SX20, SX80, MX200-800, and SparkRoom Kits i have here in my office.

Bobby McGonigle
(He, Him, His, Himself)
Video Services Engineer, EU Svcs Communication & Collaboration Services
16 Replies 16

Hi have also this problem in MX300 and SX80 version ce 9.5.2 and CUCM 10.5.2.17900-13
Anyone have the solution already?

riddlemoser
Level 1
Level 1