Cisco meeting server Conference bridge problem

[m.soleimani]

i installed CUCM 12.5 and Cisco meeting server 2.9.1 and i configured new Conference bridge with cms,

• Call from EndpointA registered to CUCM (MRGL added) to another EndpointB 
• On EndpointA, Click conference, dial EndpointC
• EndpointB call disconnected  
• EndpointA, Click Join For EndpointC
• just EndpointA and EndpointC in Conference

• Select the SIP Trunk that points to CMS is in Full Service state
• CMS conference bridge is Registered with CUCM

cisco meeting server event logs:

127.0.0.1:58164: API user "admin" created new space 0268291a-de1d-49c1-82d4-7080d4ed22d3 (001229090007)
2020-06-13	15:55:24.364	Info	call create failed to find coSpace -- attempting to retrieve from database
2020-06-13	15:55:24.369	Info	conference 36bc1610-e24a-46e1-b0ab-be0cd17b61bf: locked due to lack of lock consensus
2020-06-13	15:55:24.369	Info	conference 36bc1610-e24a-46e1-b0ab-be0cd17b61bf: lock state has changed to locked
2020-06-13	15:55:24.369	Info	API "001229090007" Space GUID: 0268291a-de1d-49c1-82d4-7080d4ed22d3 <--> Call Correlator GUID: c10bd35c-6835-4129-820a-06416313443f <--> Internal GUID: 36bc1610-e24a-46e1-b0ab-be0cd17b61bf
2020-06-13	15:55:24.369	Info	conference 36bc1610-e24a-46e1-b0ab-be0cd17b61bf: lock state has changed to unlocked
2020-06-13	15:55:24.369	Info	127.0.0.1:58166: API user "admin" created new call 8af2e4b2-c941-4d88-acf2-f737cf47992a
2020-06-13	15:55:24.382	Info	call 14: incoming SIP call from "sip:2001@172.17.54.33" to local URI "sip:001229090007@mci-lan-cms.mcci.local:5060" / "sip:001229090007@mci-lan-cms.mcci.local"
2020-06-13	15:55:24.394	Info	call 14: ending; local teardown, destination URI not matched - not connected after 0:00
2020-06-13	15:55:24.394	Info	call 14: destroying API call leg 00000000-0000-0000-0000-000000000000
2020-06-13	15:55:24.467	Info	127.0.0.1:58170: API user "admin" deleted space 0268291a-de1d-49c1-82d4-7080d4ed22d3 (001229090007)

[Patrick Pettit]

Hi. Can you try adding the domain portion to the incoming dial plan rules to see if the calls connect?  If the dial plan is already there, can you make sure it targets cospaces?  Does this solve your issue? The server is saying the URI doesn't match and sometimes this is caused that the inbound dial plan rule isn't there to accept that domain.  Hope this helps?

VR

P2

[Abdelrhman Elmenyawe]

Hi m.soleimani;

Did u find an answer to that problem, I have the same issue