Cisco MXP 990 PAL Software Upgrade License.

[Karim Moustafa Ahmed]

I have a MXP 990 PAL running software version F9.0.2 I want to Upgrade it to version F9.3.1 My Question is do I need a license and an Option Key files for this upgrae?

thanks.

[Lawrence James · Accepted solution]

If you had a valid release key for F9.0.2 then any upgrade within F9.x should not require a new Release Key. Record all the Option Keys you have just in case.

[Steve Kapinos · Accepted solution]

Not if the codec already has a valid 9.x release key on the system.

The trick was in the past, if the codec was factory loaded with a release, it would not have the release key for that release.  So the first time you did an upgrade, you needed your same release key. 

MXP doesn't allow the upgrade without the right release key (TC software does the upload first..)

[Karim Moustafa Ahmed]

Thanks Steve


Sent from Cisco Technical Support Android App

[Karim Moustafa Ahmed]

Thanks Lawrence.


Sent from Cisco Technical Support Android App