cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1022
Views
0
Helpful
1
Replies

Cisco Telepresence ISDN Link with endpoint SX20

Driss BENATTOU
Level 4
Level 4

Hi,

I have two SX20 and one ISDN Link.

Knowing as ISDN Link manage calls for one endpoint, how can route call destined to Internet from endpoint connected to isdn link box ?

Is their any possibility to separate between isdn calls and IP Calls ?

Thanks and Regards

Driss

1 Accepted Solution

Accepted Solutions

Wayne DeNardi
VIP Alumni
VIP Alumni

The ISDN Link can be connected to both the ISDN services and your LAN to make calls either over IP, or ISDN.  See the example of the C40 "Combining IP and ISDN" in the ISDN Link Data Sheet and the section on making calls in the Installation Guide.  These are also detailed in the Administrator Guide.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.

View solution in original post

1 Reply 1

Wayne DeNardi
VIP Alumni
VIP Alumni

The ISDN Link can be connected to both the ISDN services and your LAN to make calls either over IP, or ISDN.  See the example of the C40 "Combining IP and ISDN" in the ISDN Link Data Sheet and the section on making calls in the Installation Guide.  These are also detailed in the Administrator Guide.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: