10-24-2012 01:07 AM - edited 03-18-2019 12:01 AM
Hi,
Is it right, that I need at least CUCM Version 8.6 to use the touchpanels as remote control for the CTS Systems?
Sent from Cisco Technical Support Android App
Solved! Go to Solution.
10-24-2012 02:02 AM
Hi.
I quote
"CTT 12 is not supported on any releases prior to 1.8.0. Systems that are running Cisco TelePresence System software releases 1.8.0 and above must use a COP file to upgrade and install their software."
If i point you to this link
And from the installation guide i see this:
The Touch device requires a minimum Unified CM version of 8.5.1.
So, you do not need CUCM 8.6 but you need at least 8.5.1
Thanks
//Marius
10-24-2012 02:02 AM
Hi.
I quote
"CTT 12 is not supported on any releases prior to 1.8.0. Systems that are running Cisco TelePresence System software releases 1.8.0 and above must use a COP file to upgrade and install their software."
If i point you to this link
And from the installation guide i see this:
The Touch device requires a minimum Unified CM version of 8.5.1.
So, you do not need CUCM 8.6 but you need at least 8.5.1
Thanks
//Marius
10-24-2012 02:14 AM
Cool, thanks a lot!
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide