cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
493
Views
5
Helpful
2
Replies

Cluster 4510 and 8510

CGL
Level 1
Level 1

Hi all, 

 

We have a client that has a MSE cluster with 5 x 8510s, with 2 of these being clustered into a single cluster separate from our Conductor.

 

Entity 1

TMS > 1 Clustered MCU > 2 x 8510s 

 

Entity 2

TMS > Conductor > 3 x 8510s 

 

We need to expand on entity 1's port capability and they are reluctant to move to CMS just yet. Is it possible to add a 4520 or 4510 to the 2 clustered 8510's so that it looks like this:

 

TMS > 1 Clustered MCU > 2 x 8510s 1x 4510 

 

I can't find any similar documentation on if this is possible. 

 

Any advice would be appreciated. 

 

Thanks, 

1 Accepted Solution

Accepted Solutions

Wayne DeNardi
VIP Alumni
VIP Alumni

The Admin Guides say that a "Cluster" can only be made on MSE8510 blades, so you wouldn't be able to add a 45xx to a cluster.

 

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.

View solution in original post

2 Replies 2

Wayne DeNardi
VIP Alumni
VIP Alumni

The Admin Guides say that a "Cluster" can only be made on MSE8510 blades, so you wouldn't be able to add a 45xx to a cluster.

 

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.

Thanks so much Wayne, it's not perfect but we will remove a 8510 from the Conductor pool and cluster it with the MCU cluster and add the 45xx to the conductor pool in place. 

 

Thanks for your quick answer mate. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: