In a recent post I was able to get my question answerd regards to creating a Cluster Name and Pre-Shared keys. When I refer to Appendix 5 Configuring Endpoints to Work with a VCS Cluster it states to enter the Cluster Name instead of the VCS IP address.
I have a simple Cluster
VCS-NY (This is the Master)
VCS-Cluster.domin.com (This is my VCS-NY controller)
VCS-NJ
When I log into my Telepresence C40 I don't see a field under Advanced Configuration/H.323 to enter the Cluster Name. The only option is to enter the IP address of the Gatekeeper. I would appreciate feedback on what I need to do to enter the Cluster Name.
I have the same issue with my Polycom HDX 8006 endpoints where it only accepts the Gatekeeper's IP address and not the DNS name which is my VCSCluster.domain.com
If this is not an option I will look into Option #2 "DNS Round Robin" and Option #3 "Static IP"
Thank you.
</