cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
760
Views
5
Helpful
1
Replies

DX80 PLAR

schaef350
Level 1
Level 1

Is it posible to configure PLAR on a DX80 running the latest CE 9.x code?  

 

I have configured PLAR before but have not been able to get it working on the DX80.   PLAR is a listed feature on the data sheet. 

- Be sure to rate all helpful posts
1 Accepted Solution

Accepted Solutions

adschaef
Cisco Employee
Cisco Employee

I was able to confirm PLAR is actually not available in the CE code.  However, the latest CE code includes a scripting engine of sorts that allows for macros that will in turn allow you to accomplish this.  

 

I wrote up about it here: http://technologyordie.com/cisco-dx80-ce-9-kiosk

View solution in original post

1 Reply 1

adschaef
Cisco Employee
Cisco Employee

I was able to confirm PLAR is actually not available in the CE code.  However, the latest CE code includes a scripting engine of sorts that allows for macros that will in turn allow you to accomplish this.  

 

I wrote up about it here: http://technologyordie.com/cisco-dx80-ce-9-kiosk

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: