cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
402
Views
0
Helpful
1
Replies

Enable TMS agent data replication for system:event failled

cornellious
Beginner
Beginner

this was working before and the dns sever was shut down for some hours after some days movi client were showing message like conection rejected by the sever,and vcs was showing that the directory service database is not running.

i have rebooted the vcs but still showing the message

i run the diagnostics and fixed errors but the event failled   

H.323 client are registering fine

thank you in advance

Yes
1 Reply 1

Magnus Ohm
Cisco Employee
Cisco Employee

Hi

Since you have your local TMSAgent intact I would recommend you to upgrade to TMS 13.2.2 / VCS X7.2.1and migrate to TMS Provisioning Extension. However this requires a release key for the VCS going from X5 -rk-> X6 -rk-> X7

If the directory service on the VCS is not running you could try to repair it. There is a very good document here:

https://supportforums.cisco.com/docs/DOC-23654

Here you will find instructions on how to reset the directory service on the VCS (under rebuilding the TMSAgent on the VCS) if TMSPE is not applicable.

/Magnus

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: