SX80 Traffic Bandwidth are below from datasheet.
Bandwidth
● H.323/SIP up to 6 Mbps point-to-point
● Up to 10 Mbps total MultiSite bandwidth
Minimum bandwidth for resolution/frame rate (H.264)
● 720p30 from 768 kbps
● 720p60 from 1152 kbps
● 1080p30 from 1472 kbps
● 1080p60 from 2560 kbps
As far as know, all traffics are has overhead+payload. then is these specs of datasheet means payload only? or includes
overhead too?
If it means payload only, can i just calculate add 20% from payload value?
Thanks