06-02-2008 04:10 AM - edited 03-17-2019 09:24 PM
I just installed a card into a 3850 router, when I tried to configure the card with:
voice-card 0
I get not "not recognized"
I have tried 1, 2, 3 and 4 no luck.
When I do sh ver I see the card.
Thanks,
EA
06-02-2008 02:21 PM
Hi friend,
Please check with show diag if you have PVDM installed. If not, it is possible that you can't configure the card.
Please check this links:
High-Density Packet Voice Digital Signal Processor Module:
PVDM installation and removal:
Check for keywords 'DSP' or 'PVMD' in this 3800 ISR product data sheet:
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html
Regards,
- adrián.
06-03-2008 12:58 AM
Hi EA,
This has to be an issue of No/Insufficient PVDM on the router.
First check that your router is installed with minimum IP Voice Feature Set of IOS and then check if you have PVDMs installed on the router.
Kindly send show version ad show diag outputs.
-> Sushil
06-03-2008 03:42 AM
Yes, and thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide