cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
665
Views
0
Helpful
1
Replies

if registering a MX300 to CUCM 7.1.5 is possible (as a generic SIP endpoint)

rdahl
Level 5
Level 5

I have a client asking if  registering a MX300 to CUCM 7.1.5 is possible (as a generic SIP  endpoint) as a temporary solution for audio only calling until they get  their VCS infrastructure installed in a few weeks.

We're having zero luck with it...anybody have thoughts, or is it simply a no-go?

Thanks in advance...

1 Reply 1

Tomonori Taniguchi
Cisco Employee
Cisco Employee

I haven’t try this myself, but ideally possible to add MX300 on CUCM as 3rd party SIP device with “Digest User  ” configuration.

The “xConfiguration SIP Profile 1 Type” should be select “Cisco” on MX300 and configure Authentication user name and password (match with Digest User parameter configured on UCM).