cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
523
Views
0
Helpful
2
Replies

IoS suggestion Please.

nihit-tandon
Beginner
Beginner

Hi All,                  

Need you help in choosing ios image for router 3825 support outbound call from sip trunk.  Our team is not able to configure  Router 3825 router with current image( c3825-advipservicesk9-mz.150-1.M7) for outbound call.

We need  to enable bind command under dial peer.  ie bind command to be work under voice service voip sip parameter 

Thanks, nihit

2 Replies 2

Jonathan Schulenberg
Hall of Fame
Hall of Fame

15.1(4)M4 has the dial-peer bind command.

Please remember to rate helpful responses and identify helpful or correct answers.

Julio Cascante
Cisco Employee
Cisco Employee

Hello Nihit,

You could not configure bind commands under a dial peer.

In case you were using sip you would go under voice service voip and then sip.

Then you would do bind media source XXXXX bind control source XXXX.

You may also need to add the allow commands under voice service voip.

Let me know if you have further questions.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: