cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
300
Views
0
Helpful
4
Replies

Jabber to EX60/90 or EX60/90 to CTS-500 - 1080p

oz.ezer01
Beginner
Beginner

Hi,

I want to make calls between Cisco Jabber ( ver 10.6 ) to EX60 / EX90 or from EX60 / EX90 to CTS ( that support 1080p ).

I was unable to get the video to 1080p ( the most the I get is 720p ).

I have the option Resolution Option Key as true in the EX.

BTW, If I make a call between the EXs I can see 1080p, or between the CTSs ( both CTS-500 ) I can see also 1080p.

Can you please advise ?

4 Replies 4

Acevirgil de Ocampo
Rising star
Rising star

Based on the Cisco Jabber datasheet, that's the maximum video resolution it supports (720p).

http://www.cisco.com/c/en/us/products/collateral/unified-communications/jabber-windows/data_sheet_c78-704195.html?cachemode=refresh

 

regards,

Acevirgil

Thanks, and what about the EX to CTS ?

Hi,

This would be considered a CTS interop call, interop calls with CTS systems are to my knowledge still limited to 720p and will not go to 1080p, which may be what you are seeing during your testing with the EX90.

 

http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/compatibility/tx_sw_compatibility_6_0.html

 

http://www.cisco.com/c/en/us/td/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html#pgfId-125558

-Jonathan

Thanks.

I will see what I can do with that.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: