08-19-2002 09:05 AM - edited 03-17-2019 07:52 PM
I used the next URL for VoIP with LLQ http://www.cisco.com/warp/customer/788/voice-qos/voip-ov-fr-qos.html
It works
But I can use the same configuration and add Videoconference Over IP Over Frame Relay link.
08-20-2002 11:39 AM
Yes you can use the same configuration, but mark the traffic with IP Prec4, See the example below. The example below is from a test bed on a frame relay link supporting a single 348k video call.
class-map Video-Conf
match access-group 102
!
policy-map QoS-Policy
class Video-Conf
priority 450 30000
class class-default
fair-queue
!
Video-Conf Traffic
access-list 102 permit ip host 10.5.10.100 any dscp af41
08-26-2002 12:33 PM
Hi i have polycom terminal and they can mark the traffic with IP PREC4. In the configuration of access list i Can to use
access-list 180 permit ip any any precedence flash-override
for indicate ip prcec traffic. I like to use dcsp but only my VS-4000 support that and my viewstation and iPower it is not support onlyt ip prec
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide