06-21-2011 11:01 AM - edited 03-17-2019 10:21 PM
Dear Team,
We installed MeetingPlace 8.0 app server successfully on ESXi.
After the install is complete, we could not ping the MeetingPlace app server.
When checking the Network Device Control option from the Linux GUI, I can see that the ETH0 is in Inactive status. But when using the NET command on the terminal, I can see that the eth0 is active and the IP address is configured correctly.
when trying to ping the IP address of the ETH0 from the server it self (using the terminal), I've got the following error message: "Network unreachable"
Can you please advice?
Thanks in advance.
06-21-2011 04:44 PM
Did you check your vmnet configuration in ESXi?
Please remember to rate helpful responses and identify
06-27-2011 09:40 AM
like suggested by William, the nic for MPlace should be attached to the vmswitch which connects to the actual physical nics...(provided you have other vm's running on the system )...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide