I have deployed a Mitel 3300 MXE at our HQ. Office and Have cisco CUCME on 2901 routers at a couple remote sites. We have a Qsig trunk between the HQ. Site Voice GW router (2811) and the Mitel.
Everything is working except to MWI on the Cisco 7960 phones at the remotes. I need to know how to configure this in CUCME. From what I have read, there is a code CME IP phones want to see to flip on the MWI. Supposedly by way of another call. NuPointVoice Mail is behind the Mitel at HQ.
call flow is:
HQ MItel----short T1 cable/qsig PRI--->2811 Voice GW-----h.323----->Remote site 2901---->7960 IP phone
If anyone has gone through this, please let me know.
thanks
Bryan