10-16-2017 04:04 AM - edited 03-18-2019 01:32 PM
We have an MX700 Dual Screen running latest CE Software.
The layout has been configured as below when in a P-2-P call.
SP1 | SP2 | SP3 | SP4 | SP5 | SP6 | SP7 | SP8 | SP9 | SP10 |
Screen-1(Remote Party Video) | Screen-2(Self-view Video) |
SP=Speaker
The issue is that remote party audio is only being played through SP1 to SP5 and the remaining SP6 to SP10 is not being used.
Is there a setting where it will use all Speakers.
The documenation regarding speaker for MX Series is slim.
Thanks.
Solved! Go to Solution.
10-16-2017 06:05 AM
10-16-2017 06:04 AM
10-16-2017 06:05 AM
10-16-2017 06:38 AM
Hi Justin,
Thanks for your input.
The software is Collobartion Endpoint software and the command doesnt work:
"xcommand experimental audio speakercheck"
I'm not finding any information regarding speaker setup for the CE software.
11-25-2017 05:29 AM
1.)
The command to test speakers for MX Series EP running CE is:
xcommand Audio speakercheck MeasurementLength: 5
2.)
Question:- Is it still possible to enable all the speakers of MX700 / MX800 unit by any configurations or root changes.
BU Reply:- Not with the current software versions available.
Thanks for the assist Justin.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide