Hi. I'm a junior telepresence engineer, and I wish to know it is possible to direct calling with only numbering.
I'm using several SX20 and ISDN G/W for connecting to phones.
I set ISDN G/W 3241 coneect to SX20 when rings with certain phone number by 'Dial Plan configure'
So, if I call 1234-1234 from phone, then my SX20 answers it.
but, outbound call is not simple, I don't know how to setting on dial plan.
of course, it's possible to call like this 2932483@10.200.244.200, then the phone starts ringing.
(10.200.244.200 is ISDN G/W IP) (2932483 is PSTN phone in outside)
but call with only number 2932483, it doesn't work.
ISDN G/W is gatekeeper itself with 127.0.0.1 registered and SX20 is H.323 Gatekeeper call mode. so, I think only numbers also possible to call to outside.
I tried and changed several settings, but never worked. Am I wrong? or need more devices like VCS?
I wish someone help me.
thanks for reading. English is not my mother tounge, sorry for inconvenience.
