Replace C60 codec contolled by AMX controller and Touch panel with SX80.

[reedenn57]

We have a few C60 codec, controlled by AMX NI4100 and AMX Touchpanel and will be replaced by SX80 codecs.

What do I need to integrate this new SX80 into the existing AMX controller?

Thanks,

Cecilio Obejero

[Wayne DeNardi]

It will depend on what your AMX panel does - if it's simply for control of the TelePresence device, then the Touch10 Control panel that comes with the SX80 may be a better solution.

If your AMX panel does other stuff (lights, blinds, etc), then you will need to get whoever programs your AMX equipment to re-write the code to work with the SX80/CE8.x software.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

[AndreaGH]

Someone knows how to integrate Spark to the AMX touchscreen?

[Wayne DeNardi]

If your endpoint is registered with Spark, you can still provide control via third party control systems such as AMX or Crestron.

There is a nice guide and video for this on the Collaboration Help web site at: https://collaborationhelp.cisco.com/article/en-us/DOC-18142