Showing results for 
Search instead for 
Did you mean: 

Replacement Camera for an old MXP6000

Curt Dieckelt
Level 1
Level 1

Good Day,

I have a client who has a Tandberg MXP6000, and the camera was damaged and needs to be replaced.

The original replacement camera is now end of life.  Is there a camera Cisco offers that will work with this model?  If so how can someone point me in the right direction on a wiring diagram(I'm assuming it would need to be custom)



2 Replies 2

Martin Koch
VIP Alumni
VIP Alumni

Which camera do you have? The old WAVE2 or the Precision HD 720?

Did you check with your Cisco partner if they still might have some? I also did a quick search

on google and at least there are some 3rd party companies selling or repairing older vc cameras.

Bedsides that you could use the 1080p camera

But if I recall it right, that needs to be connected via a HDMI(camera) to DVI (codec) cable to get video.

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify

Wayne DeNardi
VIP Alumni
VIP Alumni

You can find all the pinouts in the MXP Codecs Physical Interface Guide:


Please remember to mark helpful responses and to set your question as answered if appropriate.