Hi Everybody,
Connection path
RoomKit Plus --- CUCM --- ExpC--- ExpE --- (internet) --- Webex
The audio call from Roomkit to webex is fine.
However, the video does not come up on both endpoint.
I have checked the SIP INVITE signal,
CUCM received the (INVITE) SDP video attribute in from RoomKit
But the (INVITE) SDP video attribute was disappeared during CUCM sent to ExpC
I did verify the CUCM's region setting between Endpoint and SIP trunk (to ExpC), both should be maximum value
- Maximum Session Bit Rate for Video Calls: 32256 kbps
- Maximum Session Bit Rate for Immersive Video Calls: 2000000000 kbps
All devices' location is "Hub none"
I don't know why CUCM won't send video attribute to ExpC ... and not sure is it the root cause of video fail
Is anybody can help?
Thanks in advance
Sam
