Hi Alex,

alex goshtaei · ‎12-20-2016

Hi,

is there anyway to see source IP address coming to interface gi 1/0 when apply QoS? there are multiple IPs coming to interface gi 1/0, but I need to know which IP address is matched to which class-map. below command only shows accumulated packets per each class-map.

show policy-map interface gi 1/0 in

thanks

Alex

Jaime Valencia · ‎12-20-2016

You probably want to try some other area, you posted this in the Video Over IP forum.

HTH

java

if this helps, please rate

Wayne DeNardi · ‎12-20-2016

Hi Alex,

As Jamie Valencia wrote, you've posted this query in the Video Over IP section of the forums which is more geared to the actual Video hardware products than the switches and routers. I'd suggest that you consider moving your post (which you can do via the Edit button on your original post) to another section of the forums where the network devices are more actively discussed, such as the LAN Switching and Routing section.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.