cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1135
Views
5
Helpful
3
Replies

SpeakerTrack 60 factory reset

Mark
Level 1
Level 1

Hi,

 

Are there any additional steps required after factory resetting speakertrack60 connected to sx80 codec or it will pair automatically?

 

Thank you

3 Replies 3

AFAIK, there is no additional configuration . SX80  should detect. Are you facing any problem ?

 

 



Response Signature


Mark
Level 1
Level 1

Hi Nithin,

 

Thank you for the response, we are currently experiencing delay on tracking the active speaker. Already upgraded the version to 9.15 and replaced HDMI cables but still the same.

There will always be some delay in the active speaker tracking as the codec tries not to physically move the cameras too often (as this can be quite disconcerting to some users).  The "tracking" feature is performed using the microphones in the SpeakerTrack camera, so changing the HDMI cables wouldn't make any difference, as they're just there to send the video to the codec.

Wayne

Please remember to mark helpful responses and to set your question as answered if appropriate.