03-26-2014 01:27 AM - edited 03-18-2019 02:47 AM
FW: TC 5.1.8
No Presentation is transmitted to the far end after pressing the presentation button but presentation has been successfully displayed on HDMI 2 output at the near end.
Solved! Go to Solution.
03-26-2014 01:38 AM
Hi
So presentation is displayed locally but not transmitted. Which endpoint is on the far end and what software is it running? Is it a p2p call or multisite/multipoint? SIP or H323? When you share the presentation on the SX20 does it say in the call information that the presentation is actually not transmitting? It might be an issue on the receiving end...
/Magnus
03-26-2014 01:38 AM
Hi
So presentation is displayed locally but not transmitted. Which endpoint is on the far end and what software is it running? Is it a p2p call or multisite/multipoint? SIP or H323? When you share the presentation on the SX20 does it say in the call information that the presentation is actually not transmitting? It might be an issue on the receiving end...
/Magnus
03-26-2014 02:26 AM
Magnus,
Tested endpoints are all SX-20 units running at TC5.1.8 using H323 call protocol. Issue is intermittent in both P2P and multisite calls. The system's information is displaying successful transmission of presentation but remote sites are not receiving the presentation. Presentation is displayed on HDMI2 output at nearend site but no presentation output on remote sites after pressing the presentation button.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide