I'm trying to locate a documet that says what configuration is pushed from CUCM and what is configured locally on the endpoint. We are currently running CUCM 10.0 with SX endpoints TC7.3.4. I have found some things in particular QOS is being pushed from system parameters in CUCM. I'm having a hard time from where the default SIP call rate 6000 is being pushed from. That is why a document would be helpful for what is being pushed VS stored locally.
Most of the parameters pushed from CUCM to the endpoint are listed under the "Product Specific Configuration Layout" session of the Device configuration page of CUCM.
I am not sure about the default SIP call rate parameter, but I guess it is not a setting provided by CUCM. However, there is a simple method to find which settings are published by CUCM. Change the settings on the endpoint, then go to CUCM page and click the button to apply settings for the device, then you check if the configuration has been restored or not.
Was my response helpful? Please rate useful replies and remember to mark any solved questions as "answered".
There are more parameters than just the "Product Specific Configuration Layout". Qos for instance is pushed from system parameters. Yes for the default call rate that is what is happening that it keeps defaulting back to 6000 which means it is being pushed from CUCM.