cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1087
Views
0
Helpful
6
Replies

SX10 Problem to receive calls

Hi All

We´ve installed a SX10 (stand alone - w/o CUCM or VCS) and we did the basic configurations.

SIP Parameters

ANAT = off

DefaultTransport = Auto

Line = Shared

Listen port is = ON

Proxy 1 to 4 Address: emptyURI - company@publicIPaddress.

Topology: SX10---Catalyst 2690X - ASA5506X - Internet

In a Lap Top, we´ve installed the Linphone application (http://www.linphone.org/)  to make a test calls

All the calls from SX10 to the Linphone are stablished, but all the calls from linphone to SX10, didn´t work.

In this case, the SX10 ring, I accepeted the call, in the Linphone the call is aborted imeditelly, and at the SX10 cut the call after few (about 30) seconds.

Software version: ce 8.1.0 Final b8c0ca3 2016-04-05

Installed options: Encryption

someone already had this problem?

regards

Claudio Arriagada