12-16-2021 07:16 AM
On the SX10 web interface the "UI Extensions configuration" is available although it does not support Macro's.
Is it possible to create a new button and link it to a function on the codec, eg automatically dial a destination?
Solved! Go to Solution.
12-19-2021 07:43 PM
With the SX10's lack of processing power and Macro support, it's extremely limited to what it can do natively.
To do something like you are wanting, you'd need to move the processing off the box itself on to some other control system which monitors the xFeedback to see button presses and then issue back a command to perform the required function.
If you just want one simple button to use to call a single unchanging destination, you could use the FacilityService settings. Note: while the FacilityService settings allow setting up to 5 different services, only the 1st one will be available on the user interface.
Please remember to mark helpful responses and to set your question as answered if appropriate.
12-19-2021 07:43 PM
With the SX10's lack of processing power and Macro support, it's extremely limited to what it can do natively.
To do something like you are wanting, you'd need to move the processing off the box itself on to some other control system which monitors the xFeedback to see button presses and then issue back a command to perform the required function.
If you just want one simple button to use to call a single unchanging destination, you could use the FacilityService settings. Note: while the FacilityService settings allow setting up to 5 different services, only the 1st one will be available on the user interface.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide