09-09-2019 07:45 PM
I have an SX20 setup to use with remote but I keep getting an error message on the screen that says "Touch Panel Not Detected". And, the web GUI says, " ERROR: Control System Connection
Solved! Go to Solution.
09-10-2019 03:26 PM
Solved: I found that my Peripherals was set to Touch Panel 1 when it should have been set to 0. Thank you.
09-09-2019 10:45 PM
make sure the touch panel is on the right subnet and or Vlan communicate with the codec (touch panel IP information)
09-10-2019 06:17 AM
What software version are you running? There were at least a couple that had a bug where you couldn't clear that message without adding a panel.
09-10-2019 03:26 PM
Solved: I found that my Peripherals was set to Touch Panel 1 when it should have been set to 0. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide