09-06-2014 10:11 PM - edited 03-18-2019 12:42 PM
ALCON,
Does anyone have a reference document that describes the cable pinout and the cable part number for the old TTC-6 not TTC-7 (MXP6000) codec connection to the TANDBERG UNIT III NTSC (analog) camera????
Any assistance would be appreciated.
VR
Chet
Solved! Go to Solution.
09-08-2014 07:56 AM
Hello Chet,
Here is a link to get the Tandberg MXP user guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/mxp-series/f8/administration_guide/tandberg_mxp_administrator_guide_f80_august2010.pdf
On page 262, you will see the output pinouts from the 6000MXP codec and page 302 gives you the input pinout on the Camera Wave2.
Hope this helps
Steve
09-08-2014 07:56 AM
Hello Chet,
Here is a link to get the Tandberg MXP user guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/mxp-series/f8/administration_guide/tandberg_mxp_administrator_guide_f80_august2010.pdf
On page 262, you will see the output pinouts from the 6000MXP codec and page 302 gives you the input pinout on the Camera Wave2.
Hope this helps
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide