05-26-2015 05:30 AM - edited 03-18-2019 04:31 AM
Hi all,
Does CTS support ITL? It's supported by the IP Phones used by some CTS but, what about the CTS itself? Is it's supported, how can you delete the ITL to migrate the CTS between CUCM clusters?
Thanks!
Solved! Go to Solution.
05-26-2015 05:56 AM
Hi,
The CTS codecs do not use an ITL, only a CTL if the call manager cluster is running in mixed mode. You may check if a CTL is installed by logging into the CLI and running the command below:
show security trustlist
HTH
Manish
05-26-2015 05:56 AM
Hi,
The CTS codecs do not use an ITL, only a CTL if the call manager cluster is running in mixed mode. You may check if a CTL is installed by logging into the CLI and running the command below:
show security trustlist
HTH
Manish
05-28-2015 09:15 AM
Thanks!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide