cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8508
Views
20
Helpful
15
Replies

Time not correct on SX80 in CUCM

jklooney1225
Level 1
Level 1

I have an SX80 that is registered in the CUCM. The time will not sync up correctly even though the codec is on the correct time zone. The codec is on Software CE8.0.1, is it possible that this is a bug in the software? I have tried reboots and even a factory reset. Any help would be appreciated.

Thanks,

John

15 Replies 15

perfect answer