11-24-2015 09:29 AM - edited 03-18-2019 05:14 AM
Hello Experts ;
I am getting below error while adding alias on TMS .Although alias seems to be ok . i have TMS 15.0 , CONDT X3.03 , TP 4.2
One or more aliases do not have matching conference aliases on TelePresence Conductor, or their associated service preference is not usable on TelePresence Conductor. Therefore these aliases will not be used for scheduling.
Any help would be appreciated
KV
11-24-2015 11:01 AM
And have you matched the configuration from your conference aliases on TP conductor to those you configured in TMS??
11-25-2015 06:22 AM
Yes ehen i put the alias in conductor check dialplan . it succcessfully matched with the dial-plan.
11-24-2015 11:58 AM
Can you tell us the alias you're using in Conductor, and what you're trying to configure in TMS?
Also, what settings do you have configured for Conductor within TMS, under Extended Settings?
11-25-2015 06:20 AM
Hello Patrick ;
In conductor
Incoming alias (must use regex) : (allhands@XXX\.com).*
In TMS ;
Alias pattern : allhands@xxx.com
Regular Expression : (allhands@XXX\.com).*
Extended settings :
10000
1
Unlimited
Default view Family
On
11-25-2015 06:34 AM
Please noted that in TMS under telepresence conductor tab
service preference: none
11-25-2015 05:54 PM
I just tested what you're using for the Conductor and TMS alias, and they are correct. My TMS saved the alias and was able to recognize the service preference that the alias in Conductor is using. Make sure that your Conductor alias is configured correct, ie: conference template, service preference, bridge pools, etc.
11-28-2015 11:50 AM
Thanks for your test . I have checked the alias ,etc every thing is in right place but still not working. By thw way i am using one TP server for all (adhoc,rendevous and TMS schedulling ) .
11-30-2015 09:29 AM
Can you provide screenshots of how your Conductor is configured, perhaps you might something configured incorrect somehwere, or I can try and replicate your configuration best I can to see where the issue is.
11-30-2015 10:05 AM
Thanks for the your time and help.. just refresh the services and it works.. But one question if i use one TP for adhoc , rendevo, scheduling conference . it is ok ?
11-30-2015 10:56 AM
Glad it's working, didn't think to have you do a force refresh on the Conductor in TMS, although when I tested your alias I didn't do that or need to.
Don't forget to mark any relevant replies as answered, to help others that might have the same issue find a solution.
08-25-2016 02:45 AM
I have the same problem, so what was the soloution for this in your case?
Thanks,
Marco
08-25-2016 02:55 AM
Just get it.
I forgot the Service Prefence "Pools to use for scheduling"
Now it´s working.
Regards,
Marco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide