Unable to install Cisco Vision Dynamic Signage Director on Platform 3 server

[RicardoValladares4214]

Hi, 

I'm trying to install Cisco Vision Dynamic Signage Director v6.1 on a Platform 3 server (UCS 220 M4).

According to this document: https://www.cisco.com/c/en/us/td/docs/Sports_Entertainment/cisco-vision/dynamic-signage-director/software/install-guides/6-1/cv-sw-install-upgrade-dsd-6-1/first-install-dsd.html   for this servers you must download the full ISO for SV-DIRECTOR from cisco.com

My questions are:

I can not find the full ISO SV-DIRECTOR for Platform 3 server, only the Upgrade ISOs, where can I find the full ISO for server ?

I downloaded the SV-DIRECTOR-UPGRADE-6.1.0-363.x86_64.iso, but was not able to boot from the mapped  virtual drive from server's KVM. Do I need to install a guest OS first ? (Red Hat, Windows, etc..)

The server is running the latest firmware and BIOS versions 

Is mandatory to install CVSD on a virtualized enviroment?

Hope for your comments, thanks

[Wayne DeNardi]

These are community supported forums, so, with something as specialised as what you are after, you are more likely to get a response through your local Cisco Account Team, or through the Cisco TAC, as it's not likely there are many people around the world that work with that particular product set.