03-07-2012 12:30 AM - edited 03-17-2019 10:53 PM
I am new in cisco voice..not have good idea and looking for a idea..please advise
I have 10 nos cisco 7940G IP phone(among them 5 nos will be installed in H.O and another 5 nos. will be installed in B.O.In between office there is a mpls vpn connectivity.Is it feasible to implement IP phone that case? My main purpose is to serve teleservice between two offices through mpls vpn network and dont have any PBX.Please guide how to implement VOIP.
Or is required any VIC2 or PVDM2??
Please help....
03-07-2012 01:17 AM
Hi,
For IP phones to work, you need call control application...
In your case you can use CME for cals between the HO and BO. Configure two routers one at HO and one at BO as CME routers. Register the phones to local CME and create diale peer for calling each other. You VOIP network is up for calling. .
Note :- You will need CME license to configure CME on routers.
Regards
Ronak patel
03-07-2012 01:28 AM
HI Ranak,
Thanks for prompt reply.
Yes I have 2811 router in HO with one VIC2-4FXO , one PVDM2-16 and 10 nos. of Cisco CallManager Express License For Single 7940 IP Phone and FL-CCME-35=; Feat Lic Communications Manager Express Up To 35 Users.
But what is the function of FL-CCME-35=; Feat Lic Communications Manager Express Up To 35 Users and where it will be applied?
Among 10 nos. of Cisco CallManager Express License For Single 7940 IP Phone, can I use 5nos. for HO and 5 no. for BO.
For BO , which components are required??
03-07-2012 01:38 AM
Hi,
BO will require same components like CME license and CME configuration.
I believe you can not use one license and split between two routers. This is legal point and licensing@cisco.com would best place to get answer.
Regards
Ronak Patel
03-07-2012 02:14 AM
Is there any function of VIC2-4FXO ,PVDM2-16 and Feat Lic Communications Manager Express in that scenario?
03-07-2012 02:19 AM
Hi
FXO would be required if you want to connect PSTN line to make PSTN calls.
PVDM, would be required if you need conferencing and G729 calls across WAN.
Regards
Ronak Patel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide