03-16-2014 05:07 PM - edited 03-18-2019 02:44 AM
Hi, I want to know the difference CTS-PRJTR-GEN1 and CTS-PRJTR-GEN2.
Is GEN meaning 'generation'?
Solved! Go to Solution.
03-16-2014 07:51 PM
GEN is used for generation in this case. We had Generation 1 projectors early on and as you would expect were replaced with Generation 2. The difference between these GEN1 and GEN2 projectors were the model types.
CTS-PRJTR-GEN1 was a Sanyo PLV-Z4 or Z5
CTS-PRJTR-GEN2 was a Sanyo PLV-Z700
I hope this helps you out.
-P
03-16-2014 08:53 PM
Additionally, the End of Sale / End of Life announcement can be found at the following:
http://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-manager/end_of_life_notice_c51-594068.html
Last date of contract renewel is December 2, 2014 and last date of Hardware support is September 30, 2015
03-16-2014 06:26 PM
Hi,
This is correct, the 2nd generation was a newer projector model.
-Jonathan
03-16-2014 07:51 PM
GEN is used for generation in this case. We had Generation 1 projectors early on and as you would expect were replaced with Generation 2. The difference between these GEN1 and GEN2 projectors were the model types.
CTS-PRJTR-GEN1 was a Sanyo PLV-Z4 or Z5
CTS-PRJTR-GEN2 was a Sanyo PLV-Z700
I hope this helps you out.
-P
03-16-2014 08:53 PM
Additionally, the End of Sale / End of Life announcement can be found at the following:
http://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-manager/end_of_life_notice_c51-594068.html
Last date of contract renewel is December 2, 2014 and last date of Hardware support is September 30, 2015
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide