cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
682
Views
0
Helpful
3
Replies

Why i see the Video diffrently on my 2 identical TV's

Shy Solenko
Beginner
Beginner

Hi,

I have sx20 connected to 2 identical screens (same size, same brand- sharp, same settings), but there is diffrences in the video color and resoulution and is not the same in both screens.

There is any explenation for that? and what i can do about it?

Thanks,

Shy

3 Replies 3

mubakhta
Enthusiast
Enthusiast

Hi Shy,

You can define those settings by logging into the codec's API via Telnet/SSH. Video Output settings are located as:

*c xConfiguration Video Output HDMI 1 Resolution: 1280_720_60

*c xConfiguration Video Output HDMI 1 OverscanLevel: None

*c xConfiguration Video Output HDMI 1 CEC Mode: Off

*c xConfiguration Video Output HDMI 1 MonitorRole: First

*c xConfiguration Video Output DVI 2 Resolution: 1024_768_60

*c xConfiguration Video Output DVI 2 OverscanLevel: None

*c xConfiguration Video Output DVI 2 MonitorRole: First

I ran the commands on a C60 and hence you see a DVI 2. In your case it would show HDMI 2 (I suppose). Run xconfiguration Video Output and you would see all the output settings and their resolution. You can change those settings there. Also if you want them to be identical I would also recommend having both the monitor roles set to First:

*c xConfiguration Video Output HDMI 1 MonitorRole: First

*c xConfiguration Video Output DVI 2 MonitorRole: First

Again in your case, it would be HDMI 2 instead of DVI 2.

Hope this answers your question.

Thanks

Mubashshir Akhtar
TelePresence Solution Group

Thanks Mubashshir Akhtar

Thanks,

I'll check it