03-14-2015 02:07 PM - edited 03-18-2019 04:11 AM
I hope someone can enlighten me to my issue. I have a cisco 1941 router. and I am trying to see what I need to do an order for it to do VOIP. another words what iso supports VOIP or is it just a license for VOIP. I am not that knowledgeable when it comes to iso's and Licenses. Currently the image is c1900-universalk9-mz.SPA.154-3.M2.bin . and when i do the show license I dont see anything about VOIP or UC.
Solved! Go to Solution.
03-15-2015 12:20 AM
Hi,
You do not have any iso on routers for Voice.I hope u are referring to SRST/CME which are RTU/Paper based licenses.
1941 does not support Voice .You can refer the link
https://supportforums.cisco.com/discussion/11341201/cisco-1941-router-support-voice
You can refer the link Table 3, Table 5 and Table 9for supported licenses on UC/Voice
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html
regds,
aman
03-15-2015 12:20 AM
Hi,
You do not have any iso on routers for Voice.I hope u are referring to SRST/CME which are RTU/Paper based licenses.
1941 does not support Voice .You can refer the link
https://supportforums.cisco.com/discussion/11341201/cisco-1941-router-support-voice
You can refer the link Table 3, Table 5 and Table 9for supported licenses on UC/Voice
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html
regds,
aman
03-15-2015 07:26 AM
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: