cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
922
Views
0
Helpful
3
Replies
Beginner

8945 CUCM 8.5.1

Hello,

I recently purchased some 8945's for ymy BE5000 (8.5.1) and cant seem to get the phone to register.

I upload 9.2.2 with the qed and cop files and the device is listed now under phone types. I have also restarted the TFTP.

Are the device packs required as well? This is a single node system. Do I need to restart the server?

The status messages are "CTL cannont be download from ip address of call manager"

Thanks in advance.

Matt                  

Everyone's tags (4)
3 REPLIES 3
Highlighted
Hall of Fame Community Legend

8945 CUCM 8.5.1

Hi Matt,

This seems to be resolved by a reboot of the Pub in your case I have seen some other

threads where stopping and starting the callmanager service worked as well. I don't know why

this isn't documented on the qed notes, but seems to be a common problem.

https://supportforums.cisco.com/message/3433167#3433167

via cli - utils system restart

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

Highlighted
Beginner

Re: 8945 CUCM 8.5.1

Thanks. Worked like a champ.

Highlighted
Hall of Fame Community Legend

8945 CUCM 8.5.1

Hi Matt,

Good stuff! You are most welcome

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

CreatePlease to create content