cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
251
Views
0
Helpful
7
Replies
Highlighted
Participant

ADD EX90 TO CM (sip)

We are running UCM 8.6.1.2006

EX90 TC7.3.0

Unable to get the EX90 to register with the CM ???

Error on the EndPoint is provisioning - HTTP -404

Any help is appreciated ...

Verified Provisioning connectivity is Auto

httpmethod is GET

Home SIP Status is inactive

Chet Cronin
801-815-3539(USA)
801-815-3539 (AFG)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Chet,

A couple of points:

1. Check if the Directory Number has been configured on CUCM if adding manually.

2. CUCM 8.6.2 or higher is recommended as per the datasheet for EX series.

Manish

View solution in original post

7 REPLIES 7
Highlighted
Cisco Employee

Hi Chet,

A couple of points:

1. Check if the Directory Number has been configured on CUCM if adding manually.

2. CUCM 8.6.2 or higher is recommended as per the datasheet for EX series.

Manish

View solution in original post

Highlighted

Hi Manish,

Sorry for asking questions in others thread. I have an EX60 with TC4.1 in Lab. I need to register this EX60 natively to CUCM 10.5. I know CUCM native registration is supported only from TC5.x. The issue is that I don't have the service contract. It's expired. So if I upgrade my system to 5.1, will it cause some issues? Regarding the Release Keys?

Thank You 

Abdul Rasheed

Highlighted

Hi Abdul,

You will need the release keys for new version

https://supportforums.cisco.com/discussion/11363421/ex60-upgrade-50-421

Manish

Highlighted

Thanks Mr. Manish. Can I register this one to VCS?

Highlighted

Yes, it can be registered to VCS, please check the minimum recommendations though.

Manish

Highlighted

Thanks Mr. Manish,

Do we need TMS and provisioning extension for ex60 registration?

Thanks for your support.

Abdul

Highlighted

You can register the EX90 to VCS with and without TMS/TMSPE, it all depends on how you'd like to deploy the endpoint, and if the VCS is setup to authenticate registered endpoints, suggest you take a look at the VCS Authenticating Devices Deployment Guide (X8.7).  TMSPE can help automate the provisioning and deployment process for the EX90, refer to the TMSPE with Cisco VCS Deployment Guide (1.6) for more information.

Content for Community-Ad