cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

269
Views
15
Helpful
3
Replies
Beginner

Alarm fan MCU 5320

Hi All.

I have MCU 5320 is warning fan the fan out of spec.

MCU 5320.pngPlease support us to resolve this issue for our customer.

Tks.

 

3 REPLIES 3
Highlighted
Cisco Employee

Re: Alarm fan MCU 5320

Hi @Phong Tran ,

 

Try power cycle of the MCU and see if the status becomes OK. Otherwise open a TAC case with 

Event and Diagnostic logs from the MCU to check if it requires replacement.

 

-Hope this helps !

Rishabh Gupta.

Rate the response & mark as a solution if found appropriate.

Advisor

Re: Alarm fan MCU 5320

Hi,

 

In addition to what Rishabh [+5] has said, u can also connect console to MCU and look for Keyword FAN in the captured logs after u power off and ON the MCU.

https://www.cisco.com/c/en/us/td/docs/telepresence/infrastructure/articles/cisco_telepresence_connect_console_port_kb_6.html

you should get message as below

HEALTH_MONITOR : Info : fan speed test successful

regds,

aman

Beginner

Re: Alarm fan MCU 5320

Hi @Rishabh Gupta

I restarted the MCU, it OK. Thank for your support.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards